Torque sensors |
Typ |
Measuring range |
Measuring method |
Accuracy |
Remarks |
Download |
BB |
|
|
|
|
|
BDR2189 |
5 - 100Nm |
DMS |
0,10% |
series"Golden Torque", for test stands, high overload security |
Prospect (German)
|
BDR4712 |
5 - 1000Nm |
DMS |
0,10% |
series "Golden Torque" for the application in the automobile industry in accordance with VDI 2862, Kat. A |
Prospect (German)
|
BDR4713 |
0,1 - 5000 Nm |
DMS |
0,1% |
USB torque sensor with configuration and evaluation Software. |
Prospect (German)
|
BDR3000 |
0,5 - 5.000 Nm |
DMS |
+- 1% |
USB-torque sensor with configuration and analysis, up to 2,500 measurements, suitable for mobile use with notebook, supply from USB |
Prospect (German)
|
BDR2195 |
20Nm |
DMS |
0,10% |
like 2189 but asymmetrical shaft ends |
Prospect (German)
|
BDR2197 |
20Nm |
DMS |
0,10% |
only for replacements in old vacilities available |
Prospect (German)
|
BDR2513 |
10, 15, 20, 50 Nm |
DMS |
0,20% |
shaft ends |
Prospect (German)
|
BDR1 |
1 - 5000Nm |
DMS |
0,10% |
square for application of screwing |
Prospect (German)
|
BDR2 |
1 - 500Nm |
DMS |
0,10% |
shaft ends |
Prospect (German)
|
BDR12 |
1 - 5000Nm |
DMS |
0,10% |
shaft ends, measurement angle rotation |
Prospect (German)
|
BDR2112 |
0,1 - 20000Nm |
DMS |
0,1% |
shaft ends, for flying installation |
Prospect (German)
|
BDR2113 |
0,1 - 5000Nm |
DMS |
0,10% |
square for screwing procedures |
Prospect (German)
|
BDR2153 |
0,1 - 20Nm |
DMS |
0,10% |
hexagonal for screwing procedures |
Prospect (German)
|
BDR2208 |
1 - 5000Nm |
DMS |
0,10% |
2 ranges parallel |
Prospect (German)
|
BDR2212 |
0,03 - 20000Nm |
DMS |
0,10% |
foot execution |
Prospect (German)
|
BDR2452 |
20 - 500Nm |
DMS |
0,10% |
shaft ends, reaction torque sensor |
Prospect (German)
|
BDR0816 |
1 - 200Nm |
DMS |
0,40% |
shaft ends, low cost |
Prospect (German)
|
BDR2554 |
50 - 1000Nm |
DMS |
0,15% oder 0,05% |
small installation length, two accuracy classes, contactless, digital signal transmission |
Prospect (German)
|
BD1904 |
120 - 1000Nm |
DMS |
0,50% |
flange for armature/drive |
Prospect (German)
|
BD1945 |
1 - 200Nm |
DMS |
0,20% |
Simulation weicher Schraubfall |
Prospect (German)
|
BD2223 |
12 - 3000Nm |
DMS |
0,20% |
Flansch/ Vierkant |
Prospect (German)
|
BD2268 |
50 - 5000Nm |
DMS |
0,05 u. 0,1% |
Flange both ends, short building |
Prospect (German)
|
BD2417 |
120 - 1000Nm |
DMS |
0,20% |
Flanges DIN/ISO, measuring amplifier inserted |
Prospect (German)
|
BD2553 |
10Nm...200Nm |
DMS |
0,1% |
Flange-flange-solution, short axial length, high torsional stiffness, through hole |
Prospect (German)
|
BD3712 |
10, 20, 30, 50, 100, 200 |
DMS full bridge |
0,1% |
Static torque sensor with both ends flange and large through-hole |
Prospect (German)
|
BDF30 |
10 - 20000Nm |
DMS |
0,20% |
Flansch beidseitig |
Prospect (German)
|
BDFW25 |
10 - 1000Nm |
DMS |
0,20% |
Flansch/Wellenende |
Prospect (German)
|
BDFW35 |
12 - 2000Nm |
DMS |
0,20% |
Flansch/Vierkant |
Prospect (German)
|
BDH15 |
0,2 - 20Nm |
DMS |
0,20% |
bis 2Nm mit mech. Überlastschutz |
Prospect (German)
|
BDK15 |
1 - 100Nm |
DMS |
0,20% |
Welle beidseitig, Miniaturausführung |
Prospect (German)
|
BDV14 |
2 - 5000Nm |
DMS |
0,20% |
Vierkant beidseitig |
Prospect (German)
|
BDR2500 |
0,005 - 150Nm |
DMS |
0,1% |
Contactless and digital signal transmission |
Prospect (German)
|
BDR2176 |
20Nm, 30Nm |
|
0,1% |
Signal transfer contactless and digital from rotor to stator. |
Prospect (German)
|
BDR2178 |
160Nm, 200Nm |
|
0,1% |
Signal tranfer contactless and digital from rotor to stator. |
Prospect (German)
|
BDR2477 |
0,2 Nm...200 Nm |
Contactless data transmission |
0,25% |
Torque sensor rotating, very short axial length |
Prospect (German)
|
Drehsteife-Halbkupplung966 |
25, 37, 50, 62, 75 coupling size |
|
|
For free floating torque sensor assembly |
Prospect (German)
|
BDR2175 |
1, 2, 5 Nm |
0,1, optional 0,05 % |
|
Small torque sensor, optional with calibration after VDE / VDI 2646 |
Prospect (German)
|
|